Skip to content
vsMars
Spec drill · Polling rate

M75 Air Wireless vs DeathAdder V3 Pro

A side-by-side readout for polling rate.

Corsair · M75 Air Wireless
2000Hz
Razer · DeathAdder V3 Pro
4000Hz
▲ Lead
VerdictDeathAdder V3 Pro wins on polling rate.
Context

Understanding polling rate

Polling rate is a numeric spec measured in Hz. On this metric, higher values are generally better, but returns diminish past category-typical thresholds — going from a low value to a mid value usually matters far more than going from a mid value to a high one. When comparing two products, focus on the percentage gap rather than the raw delta: a 200-unit lead means something very different at the low end of the range than at the high end. Pay attention to the unit, too — manufacturers sometimes quote peak or burst figures that are not sustained in real-world use. Cross-check the published number against independent measurements where possible, especially for performance and battery claims. Finally, remember that a single spec rarely tells the whole story; the Mars Score weighs polling rate together with the rest of the spec sheet so one outlier doesn't distort the verdict.

This matchupDeathAdder V3 Pro's 4000Hz is roughly 100% higher than M75 Air Wireless's 2000Hz (a 2000Hz gap). Whether that gap is noticeable depends on workload — small percentage gaps rarely change day-to-day experience, while gaps of 20% or more usually do.

Drill more

Other specs on this comparison

See the full Mice category for all products ranked by Mars Score.