Between the Svanar and AONIC 3, the Svanar comes out ahead in several specs, while the AONIC 3 wins on impedance and sensitivity. Overall, the Svanar scores 50.3 and the AONIC 3 scores 56.6 on our Mars Score.
Which should you buy?
The AONIC 3 edges ahead on the Mars Score (50.3 vs 56.6), but the 6.3-point gap is small enough that the right pick comes down to which spec advantages matter to you.
The Svanar doesn't pull ahead on any single popular-comparison spec — its strengths sit in the spec table groups rather than the headline advantages.
Pick the AONIC 3 if you care most about impedance and sensitivity. Its strongest claims are impedance, sensitivity.
Both ship with comparable driver count, detachable cable, so those specs don't separate the two — focus on the differences below.
Bottom line: the AONIC 3 is the safer default. The other model is the right choice only when its specific advantages line up with your priorities.
Why Hifiman - Svanar wins
- No decisive advantages.
Why Shure - AONIC 3 wins
- ▲Impedance — 30.00 Ω less. 30 vs 60.
- ▲Sensitivity — 5.61% more. 113 dB vs 107 dB.
Spec comparison
Drivers
| Spec | Hifiman - Svanar | Shure - AONIC 3 |
|---|---|---|
| Driver count | 1 | 1 |
| Driver types | Dynamic (Topology Diaphragm) | Single Balanced Armature |
| Impedanceⓘ | 60 Ω | 30 Ωlead |
| Sensitivityⓘ | 107 dB | 113 dBlead |
Build
| Spec | Hifiman - Svanar | Shure - AONIC 3 |
|---|---|---|
| Detachable cable | true | true |
| Connector | 0.78mm 2-pinlead | MMCX |
Frequently asked
Spec-level deep dives
More from the same brands
vsMars is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. Learn more.