Skip to content
vsMars
Head-to-head

Hifiman - Svanar vs Shure - AONIC 3

Last updated · How Mars Score works
SvanarHIFIMANILLUSTRATION
Probe A
Hifiman
Svanar
50.3/ 100D
Drivers50· 70%
Build· 30%
AONIC 3SHUREILLUSTRATION
Probe B
Shure
AONIC 3
56.6/ 100D
Drivers57· 70%
Build· 30%
The fork

Where they actually differ

The most decisive specs, ranked by how much they matter — before the full spec table.

SpecHifiman - SvanarShure - AONIC 3
Impedance60 Ω30 Ω
Sensitivity107 dB113 dB
Quick verdict

Between the Svanar and AONIC 3, the Svanar comes out ahead in several specs, while the AONIC 3 wins on impedance / sensitivity. Overall, the Svanar scores 50.3 and the AONIC 3 scores 56.6 on our Mars Score.

Buying advice

Which should you buy?

The AONIC 3 edges ahead on the Mars Score (50.3 vs 56.6), but the 6.3-point gap is small enough that the right pick comes down to which spec advantages matter to you.

The Svanar does not pull ahead on any single popular-comparison spec — its strengths sit in the spec-table groups rather than the headline advantages.

Pick the AONIC 3 if you care most about impedance / sensitivity. Its strongest claims are impedance, sensitivity. The single most decisive one: Impedance — 30.00 Ω less. 30 vs 60.

Both ship with comparable driver count, detachable cable, so those specs do not separate the two — focus on the differences below.

Bottom line: the AONIC 3 is the safer default. The other model is the right choice only when its specific advantages line up with your priorities.

Decision guide

Which should you buy: Hifiman - Svanar or Shure - AONIC 3?

Shure - AONIC 3 leads the current Mars Score by 6.3 points.The more useful decision is the trade-off behind that result: compare impedance, sensitivity against the way you will actually use the product.

Choose Hifiman - Svanar if…

Hifiman - Svanar does not lead a decisive measured field here, so choose it for price, ecosystem, design, or availability when those matter more to you.

Choose Shure - AONIC 3 if…

Shure - AONIC 3 has the measurable edge on impedance ohm, sensitivity db.

This is a structured comparison of the published catalog values. It is not a claim of identical real-world performance across every workload; use the linked spec drill-downs and methodology page to inspect the inputs.

Why Hifiman - Svanar wins

  • No decisive advantages.

Why Shure - AONIC 3 wins

  • Impedance — 30.00 Ω less. 30 vs 60.
  • Sensitivity — 5.61% more. 113 dB vs 107 dB.
Full readout

Spec comparison

Drivers

SpecHifiman - SvanarShure - AONIC 3
Driver count11
Driver typesDynamic (Topology Diaphragm)Single Balanced Armature
Impedance60 Ω30 Ωlead
Sensitivity107 dB113 dBlead

Build

SpecHifiman - SvanarShure - AONIC 3
Detachable cabletruetrue
Connector0.78mm 2-pinleadMMCX
Drill down

Spec-level deep dives

By manufacturer

More from the same brands